same case you used when you added the user. To see the case of the
, enter the
name>
Format
Mode
no users name
This command removes a user account.
Format
Mode
You cannot delete the "admin" user account.
NOTE:
users passwd
Use this command to change a password. Passwords are a maximum of eight alphanumeric
characters. If a user is authorized for authentication or encryption is enabled, the password
length must be at least eight alphanumeric characters. The password is case sensitive. When
you change a password, a prompt asks for the old password. If there is no password, press
enter. You must enter the
see the case of the
To specify a blank password in the configuration script, you must specify it as
NOTE:
a space within quotes, for example, " ". For more information about creating
configuration scripts, see
Default
Format
Mode
no users passwd
This command sets the password of an existing user to blank. When you change a password, a
prompt asks for the old password. If there is no password, press enter.
Format
Mode
write memory
Use this command to save running configuration changes to NVRAM so that the changes you
make will persist across a reboot. This command is the same as copy system:running
config nvram:startup-config.
Format
Mode
command.
show users
users name <username>
Global Config
no users name <username>
Global Config
in the same case you used when you added the user. To
<username>
, enter the
<username>
"Configuration Scripting Commands"
no password
users passwd <username>
Global Config
no users passwd <username>
Global Config
write memory
Privileged EXEC
command.
show users
User Account Commands
7 Management Commands
<user-
on page 326.
307