Clear (Ap Profile Config Mode); Show Wireless Ap Profile - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Mode
1-16

clear (AP Profile Config Mode)

This command restores an AP profile configuration to default values except for the profile
name. The profile name is not an AP configuration and is only used for descriptive purposes,
therefore it is not cleared with this command. To delete a profile name, use the no name
command.
Format
Mode

show wireless ap profile

This command displays the configured AP profiles. If you do not enter any command
parameters, a summary of all AP profiles is displayed. You can enter an AP profile ID to
display detailed configuration for a specific profile. You can also enter the
mac–authentication–client
for that profile.
Format
Mode
macaddr
AP Profile ID Existing AP profile ID
Profile Name A descriptive name for the corresponding AP profile ID
Profile Status Indicates the current AP profile status:
RADIUS Server IP Address The global RADIUS server IP Address for the AP profile.
RADIUS Server Secret Configured Indicates if the global RADIUS server secret is config-
RADIUS Accounting Mode Indicates if the global RADIUS accounting mode is enabled or
MAC Authentication Action Indicates the MAC authentication action, allow or deny.
Client MAC Address Ethernet address for a client.
172 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
Privileged EXEC
AP Profile ID
clear
AP Profile Config
keywords to display the configured MAC authentication list
show wireless ap profile [<1-16> [mac-authentication-client
[<macaddr>]]]
Privileged EXEC
MAC address of a physical AP
Configured—the profile exists, no managed APs are configured with the pro-
file.
Associated—one or more managed APs are configured with the profile.
Apply Requested—you have invoked the
Apply In Progress—the profile is currently being applied to the associated
managed APs. When the apply is complete, the profile returns to Associated
status.
ured for this AP profile.
disabled for the AP Profile.
command for the profile.
apply