Show Logging; Show Logging Buffered; Show Logging Hosts - D-Link DWL-8500AP Command Reference Manual

Format
Mode

show logging

This command displays logging configuration information.
Format
Mode
Logging Client Local Port Port on the collector/relay to which syslog messages are sent.
CLI Command Logging Shows whether CLI Command logging is enabled.
Console Logging Shows whether console logging is enabled.
Console Logging Severity Filter The minimum severity to log to the console log. Messages
Buffered Logging Shows whether buffered logging is enabled.
Syslog Logging Shows whether syslog logging is enabled.
Log Messages Received Number of messages received by the log process. This includes
Log Messages Dropped Number of messages that could not be processed due to error or lack
Log Messages Relayed Number of messages sent to the collector/relay.

show logging buffered

This command displays buffered logging (system startup and system operation logs).
Format
Mode
Buffered (In-Memory) Logging Shows whether the In-Memory log is enabled or disabled.
Buffered Logging Wrapping Behavior The behavior of the In Memory log when faced with
Buffered Log Count The count of valid entries in the buffered log.

show logging hosts

This command displays all configured logging hosts.
Format
Mode
Host Index
IP Address
Severity Level The minimum severity to log to the specified address. The possible values are
no logging syslog
Global Config
show logging
Privileged EXEC
with an equal or lower numerical severity are logged.
messages that are dropped or ignored.
of resources.
show logging buffered
Privileged EXEC
a log full situation.
show logging hosts
Privileged EXEC
(Used for deleting hosts)
IP address of the logging host.
emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6),
or debug (7).
6 Utility Commands
Logging Commands 271