CLI Command Reference
Mode
no radius server host
The
version of this command deletes the configured RADIUS authentication server IP
no
address.
Format
Mode
radius server secret
This command configures the secret to use in communicating with the configured RADIUS
server. The secret must be a printable string in the range 0-64 characters. When the command
is entered, you will be prompted to enter the secret and then again to confirm the secret.
Format
Mode
radius accounting
This command enables RADIUS accounting mode for authentication on this network.
Default
Format
Mode
no radius accounting
The
version of this command disables RADIUS accounting mode for authentication on this
no
network.
Format
Mode
wpa versions
This command configures the WPA version(s) supported on the network. One or both
parameters must be specified. This configuration only applies when the configured security
mode is WPA.
Default
Format
Mode
wpa
wpa2
162
© 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
Network Config
no radius server host
Network Config
radius server secret
Network Config
Disable
radius accounting
Network Config
no radius accounting
Network Config
wpa/wpa2
wpa version {wpa [wpa2] | wpa2}
Network Config
WPA version allowed.
WPA2 version allowed.