Show Wireless Client Failure Status; Show Wireless Client Adhoc Status - D-Link DWL-8500AP Command Reference Manual

Mode

show wireless client failure status

This command displays the client failure status parameters.
Format
Mode
macaddr
MAC Address The Ethernet address of the client.
VAP MAC Address The managed AP VAP Ethernet MAC address on which the client
SSID
Last Failure Type Indicates the last type of failure that occurred.
Authentication Failure Count Count of authentication failures for this client.
Association Failure Count Count of association failures for this client.
Age

show wireless client adhoc status

This command displays summary or detailed data for Ad Hoc clients detected on the network
by a managed AP.
Format
Mode
macaddr
MAC Address The Ethernet address of the client. If the Detection Mode is Beacon, then the
AP MAC Address The base Ethernet MAC Address of the managed AP which detected the
Location
Radio
Detection Mode The mechanism of detecting this Ad Hoc device. The possible values are
Age
Privileged EXEC
show wireless client [<macaddr>] failure status
Privileged EXEC
Client MAC address.
attempted to associate and/or authenticate.
The network SSID on which the client attempted to associate and/or authenti-
cate.
Time since failure occurred.
show wireless client [<macaddr>] adhoc status
Privileged EXEC
Client MAC address.
client is represented as an AP in the RF Scan database and the Neighbor AP
List. If the Detection Mode is Data Frame, then the client information is in the
Neighbor Client List.
client.
The configured descriptive location for the managed AP.
The radio interface on the AP that detected the ad hoc device.
Beacon Frame or Data Frame.
Time in seconds since the last detection of the ad hoc network.
4 Wireless Commands
Client Failure and Ad Hoc Status Commands 203