Show Wireless Ap Radio Status - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Configuration Failure Error An ASCII string provided by the AP containing an error mes-
Debug Mode
Discovery Reason This status value indicates how the managed AP was discovered. The sta-
Status
Code Download Status This indicates the current status of a code download request for this
Client Associations Total number of clients currently associated to the AP. This is the sum of
System Uptime Time in seconds since last power-on reset of the managed AP.
Age

show wireless ap radio status

This command displays operational status for a switch managed AP radio interface. If no
parameters are specified, a summary of radio status for all managed APs is displayed. If an AP
MAC address and radio interface are specified, the detailed status is displayed.
Format
Mode
190 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
sage for the last failing configuration element.
Indicates whether or not debug mode is enabled on the AP. Debug mode
allows you telnet access to the device.
tus is one of the following values:
IP Poll Received - The AP was discovered via an IP poll from the Unified
Switch; its IP address is configured in the IP polling list.
Peer Redirect - The AP was discovered through a peer switch redirect, the AP
tried to associate with another peer switch and learned the current Unified
Switch IP address from the peer (peer learned Unified Switch IP address in
RADIUS server response when validating the AP.)
Switch IP Configured - The managed AP is configured with the Unified
Switch IP address.
Switch IP DHCP - The managed AP learned the correct Unified Switch IP
address through DHCP option 43.
L2 Poll Received - The AP was discovered through the D-Link Wireless
Device Discovery Protocol.
The current managed state of the AP. The possible values are:
Discovered - The AP is discovered and by the switch, but is not yet authenti-
cated.
Authenticated - The AP has been validated and authenticated (if authentica-
tion is enabled), but it is not configured.
Managed - The AP profile configuration has been applied to the AP and it is
operating in managed mode.
Failed - The Unified Switch lost contact with the AP. A failed entry will
remain in the managed AP database unless you remove it. Note that a man-
aged AP will temporarily show a failed status during a reset.
AP.
all associated clients for all the VAPs enabled on the AP.
Time since last communication between the WDS and the AP.
show wireless ap {<macaddr> radio [<1-2>] status | radio status}
Privileged EXEC