Wpa2 Pre-Authentication Limit; Wpa2 Key-Forwarding - D-Link DWL-8500AP Command Reference Manual

Format
Mode
0-1440
no wpa2 pre-authentication timeout
The version of this command sets the WPA2 pre-authentication timeout to its default value.
no
Format
Mode

wpa2 pre-authentication limit

This command configures the WPA2 pre-authentication limit for the network. This specifies a
limit on the number of APs within the peer group to which one client is allowed to pre-
authenticate.
Default
Format
Mode
0-192
no wpa2 pre-authentication limit
The version of this command sets the configured WPA2 pre-authentication limit to its
no
default value.
Format
Mode

wpa2 key-forwarding

This command enables WPA2 key forwarding support for client roaming on the network.
Default
Format
Mode
no wpa2 key-forwarding
The version of this command disables WPA2 key forwarding support on the network.
no
Format
Mode
wpa2 pre-authentication timeout <0-1440>
Network Config
The WPA2 pre-authentication timeout in minutes, where 0 indicates pre-
authentications do not timeout on the AP.
no wpa2 pre-authentication timeout
Network Config
0, no limit
wpa2 pre-authentication limit <0-192>
Network Config
Valid WPA2 pre-authentication limit
no wpa2 pre-authentication limit
Network Config
Enable
wpa2 key-forwarding
Network Config
no wpa2 key-forwarding
Network Config
4 Wireless Commands
Wireless Network Commands 165