D-Link DWL-8500AP Command Reference Manual page 265

If you use the
switchport
Octets Received The total number of octets of data received by the processor (excluding
framing bits but including FCS octets).
Total Packets Received Without Error The total number of packets (including broadcast
packets and multicast packets) received by the processor.
Unicast Packets Received The number of subnetwork-unicast packets delivered to a higher-
layer protocol.
Multicast Packets Received The total number of packets received that were directed to a
multicast address. Note that this number does not include packets directed to
the broadcast address.
Broadcast Packets Received The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast packets.
Receive Packets Discarded The number of inbound packets which were chosen to be dis-
carded even though no errors had been detected to prevent their being deliver-
able to a higher-layer protocol. A possible reason for discarding a packet
could be to free up buffer space.
Octets Transmitted The total number of octets transmitted out of the interface, including
framing characters.
Packets Transmitted without Errors The total number of packets transmitted out of the
interface.
Unicast Packets Transmitted The total number of packets that higher-level protocols
requested be transmitted to a subnetwork-unicast address, including those that
were discarded or not sent.
Multicast Packets Transmitted The total number of packets that higher-level protocols
requested be transmitted to a Multicast address, including those that were dis-
carded or not sent.
Broadcast Packets Transmitted The total number of packets that higher-level protocols
requested be transmitted to the Broadcast address, including those that were
discarded or not sent.
Transmit Packets Discarded The number of outbound packets which were chosen to be dis-
carded even though no errors had been detected to prevent their being deliver-
able to a higher-layer protocol. A possible reason for discarding a packet
could be to free up buffer space.
Most Address Entries Ever Used The highest number of Forwarding Database Address
Table entries that have been learned by this switch since the most recent
reboot.
Address Entries in Use The number of Learned and static entries in the Forwarding Data-
base Address Table for this switch.
Maximum VLAN Entries The maximum number of Virtual LANs (VLANs) allowed on this
switch.
Most VLAN Entries Ever Used The largest number of VLANs that have been active on this
switch since the last reboot.
keyword, the following information appears:
System Information and Statistics Commands
6 Utility Commands
265