Spanning-Tree Bpdumigrationcheck; Spanning-Tree Configuration Name; Spanning-Tree Configuration Revision - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Default
Format
Mode
no spanning-tree
This command sets the spanning-tree operational mode to disabled. While disabled, the
spanning-tree configuration is retained and can be changed, but is not activated.
Format
Mode

spanning-tree bpdumigrationcheck

Use this command to force a transmission of rapid spanning tree (RSTP) and multiple
spanning tree (MSTP) BPDUs. Use the
specified interface, or use the
command forces the BPDU transmission when you execute it, so the command does not
change the system configuration or have a "no" version.
Format
Mode

spanning-tree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration
that this switch is currently using. The
Default
Format
Mode
no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format
Mode

spanning-tree configuration revision

This command sets the Configuration Identifier Revision Level for use in identifying the
configuration that this switch is currently using. The Configuration Identifier Revision Level
is a number in the range of 0 to 65535.
Default
Format
Mode
42 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
disabled
spanning-tree
Global Config
no spanning-tree
Global Config
<slot/port>
keyword to transmit BPDUs from all interfaces. This
all
spanning-tree bpdumigrationcheck {<slot/port> | all}
Global Config
<name>
base MAC address in hexadecimal notation
spanning-tree configuration name <name>
Global Config
no spanning-tree configuration name
Global Config
0
spanning-tree configuration revision <0-65535>
Global Config
parameter to transmit a BPDU from a
is a string of up to 32 characters.