Show Wireless Ap Radio Neighbor Client Status - D-Link DWL-8500AP Command Reference Manual

Format
Mode
macaddr
1-2
MAC Address The Ethernet address of the switch managed AP.
Location
Radio
Neighbor AP MAC The Ethernet MAC address of the neighbor AP network, this could be a
SSID
RSSI
Status
Age

show wireless ap radio neighbor client status

This command displays the status parameters for each client detected as a neighbor to the
specified managed AP radio. A client neighbor may be detected through one or more
methods, RF scan on the radio, client association to a VAP on the radio, or receiving a probe
request from the client.
Format
Mode
show wireless ap <macaddr> radio <1-2> neighbor ap status
Privileged EXEC
Switch managed AP MAC address.
The radio interface on the AP.
A location description for the AP, this is the value configured in the valid AP
database (either locally or on the RADIUS server).
Indicates a radio interface on the AP.
physical radio interface or VAP MAC address. For D-Link APs, this is always
a VAP MAC address. The neighbor AP MAC address may be cross-refer-
enced in the RF Scan status.
Service Set ID of the neighbor AP network.
Received Signal Strength Indication, this is an indicator of the signal strength
relative to the neighbor and may give an idea of the neighbor's distance from
the managed AP.
Indicates the managed status of the AP, whether this is a valid AP known to
the switch or a Rogue on the network. The valid values are:
WS Managed - The neighbor AP is managed by this switch. The neighbor AP
status can be referenced using its base MAC address.
Peer WS Managed - The neighbor AP is managed by another switch within
the peer group.
Standalone - The AP is managed in standalone mode and configured as a valid
AP entry (local or RADIUS).
Acknowledged Rogue - The AP is configured as a valid AP entry (local or
RADIUS), it has been acknowledged and is not reported as Rogue.
Ad Hoc Rogue - The AP neighbor was detected participating in an ad hoc net-
work.
Indicates the time since this AP was last reported from an RF scan on the
radio.
show wireless ap <macaddr> radio <1-2> neighbor client status
Privileged EXEC
4 Wireless Commands
Switch Managed Access Point Commands 193