Spanning-Tree Hello-Time; Spanning-Tree Max-Age - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Format
Mode
no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal
spanning tree to the default value.
Format
Mode

spanning-tree hello-time

This command sets the Admin Hello Time parameter to a new value for the common and
internal spanning tree. The hello time
with the value being less than or equal to (Bridge Max Age / 2) - 1.
Default
Format
Mode
no spanning-tree hello-time
This command sets the admin Hello Time parameter for the common and internal spanning
tree to the default value.
Format
Mode

spanning-tree max-age

This command sets the Bridge Max Age parameter to a new value for the common and
internal spanning tree. The max-age value is in seconds within a range of 6 to 40, with the
value being less than or equal to 2 x (Bridge Forward Delay - 1).
Default
Format
Mode
no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning tree
to the default value.
Format
Mode
44 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
spanning-tree forward-time <4-30>
Global Config
no spanning-tree forward-time
Global Config
<value>
2
spanning-tree hello-time <1-10>
Interface Config
no spanning-tree hello-time
Interface Config
20
spanning-tree max-age <6-40>
Global Config
no spanning-tree max-age
Global Config
is in whole seconds within a range of 1 to 10,