Show Spanning-Tree Mst Port Detailed - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
MSTP BPDUs Transmitted Multiple Spanning Tree Protocol Bridge Protocol Data Units
MSTP BPDUs Received Multiple Spanning Tree Protocol Bridge Protocol Data Units

show spanning-tree mst port detailed

This command displays the detailed settings and parameters for a specific switch port within a
particular multiple spanning tree instance. The parameter
corresponds to the desired existing multiple spanning tree instance. The
desired switch port.
Format
Mode
MST Instance ID The ID of the existing MST instance.
Port Identifier The port identifier for the specified port within the selected MST instance. It
Port Priority The priority for a particular port within the selected MST instance. The port
Port Forwarding State Current spanning tree state of this port.
Port Role
Auto-Calculate Port Path Cost Indicates whether auto calculation for port path cost is
Port Path Cost Configured value of the Internal Port Path Cost parameter.
Auto-Calculate External Port Path Cost Indicates whether auto calculation for external
External Port Path Cost Configured value of the external Port Path Cost parameter.
Designated Root The Identifier of the designated root for this port.
Designated Port Cost Path Cost offered to the LAN by the Designated Port
Designated Bridge
Designated Port Identifier Port on the Designated Bridge that offers the lowest cost to the
If you specify 0 (defined as the default CIST ID) as the
settings and parameters for a specific switch port within the common and internal spanning
tree. The
Port Identifier The port identifier for this port within the CST.
Port Priority The priority of the port within the CST.
Port Forwarding State The forwarding state of the port within the CST.
Port Role
50 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
sent
received.
show spanning-tree mst port detailed <mstid> <slot/port>
Privileged EXEC
User EXEC
is made up from the port priority and the interface number of the port.
priority is displayed in multiples of 16.
Each enabled MST Bridge Port receives a Port Role for each spanning tree.
The port role is one of the following values: Root Port, Designated Port,
Alternate Port, Backup Port, Master Port or Disabled Port
enabled.
port path cost is enabled.
B
ridge Identifier of the bridge with the Designated Port.
LAN.
> is the desired switch port. In this case, the following are displayed.
<slot/port
The role of the specified interface within the CST.
is a number that
<mstid>
<slot/port
, this command displays the
<mstid>
> is the