Show Wireless Power-Plan; Show Wireless Power-Plan Proposed; Peer Unified Switch Commands - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Mode
a
bg
Current Status Indicates the status of a manual channel plan request.
AP MAC Address The managed AP Ethernet MAC address.
Location
Radio
Current Channel The current channel on the managed AP radio.
New Channel The new channel computed by the channel algorithm.

show wireless power-plan

This command displays status and configuration for automatic power adjustment. The
command does not accept any arguments.
Format
Mode
Power Plan Mode The mode for automatic power adjustment, manual or interval. If the
Power Plan Interval If the power adjustment mode is interval, this indicates the frequency in

show wireless power-plan proposed

This command displays the proposed power adjustments for a manual request to run the power
algorithm. The command does not accept any arguments. The proposed power changes may be
cleared or applied using the wireless power-plan command.
Format
Mode
Current Status Indicates the status of a manual power adjustment request.
AP MAC Address The managed AP Ethernet MAC address.
Location
Radio
Current Power The current transmit power on the managed AP radio.
New Power

Peer Unified Switch Commands

The commands in this section provide peer Unified Switch status.
154 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
Privileged EXEC
Configure channel plan mode for 802.11a.
Configure channel plan mode for 802.11b/g.
A descriptive location string configured for the managed AP.
The radio interface on the managed AP.
show wireless power-plan
Privileged EXEC
mode is manual, the power algorithm will not run unless you request it.
minutes that power adjustments are computed and applied.
show wireless power-plan proposed
Privileged EXEC
A descriptive location string configured for the managed AP.
The radio interface on the managed AP.
The new transmit power computed by the power algorithm.