User Rate-Limit Total-Octets; Show Captive-Portal User - D-Link DWL-8500AP Command Reference Manual

user rate-limit total-octets

Use this command to limit the number of bytes the user is allowed to transmit and receive. The
maximum number of octets is the sum of octets transmitted and received. After this limit has
been reached, the user will be disconnected. 0 octets denote unlimited transmission. The
<user-id>
variable is the number of bytes.
<octets>
Default
Format
Mode
Example:
The following shows an example of the command.
(Switch)(Config-CP) #user 1 rate-limit total-octets 100<cr>
no user rate-limit total-octets
This command sets the user rate-limit total-octets to the default value.
Format
Mode
Example:
The following shows an example of the command.
(Switch)(Config-CP) #no user 1 rate-limit total-octets<cr>

show captive-portal user

This command displays all configured users or a specific user in the captive portal local user
database. Enter the optional username to view information about the specified user. The
[user-name]
Format
Mode
User
Group
Session Timeout Displays the number of seconds
Idle Timeout Displays the number of seconds
When you specify a user with the optional
displays:
User Displays the user name
Password Configured. Indicates whether a password is configured for the user
Group Name Displays the group to which the user belongs
variable is the user ID, which can be from 1 to 128 alphanumeric characters. The
0
user <user-id> rate-limit total-octets <octets>
Captive Portal Config Mode
no user <user-id> rate-limit total-octets
Captive Portal Config Mode
variable is a valid user configured in the local database.
show captive-portal user [user-name]
Privileged EXEC
Displays the user name
Displays the group to which the user belongs
variable, the following information
[user-name]
Captive Portal Local User Commands
4 Wireless Commands
223