Show Spanning-Tree Summary; Show Spanning-Tree Vlan; Vlan Commands - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Format
Modes
MST Instance ID List List of multiple spanning trees IDs currently configured.
For each MSTID:
Associated FIDs List of forwarding database identifiers associated with this instance.
Associated VLANs List of VLAN IDs associated with this instance.

show spanning-tree summary

This command displays spanning tree settings and parameters for the switch. The following
details are displayed on execution of the command.
Format
Modes
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or
Configuration Name Identifier used to identify the configuration currently being used.
Configuration Revision Level Identifier used to identify the configuration currently being
Configuration Digest Key Identifier used to identify the configuration currently being used.
MST Instances List of all multiple spanning tree instances configured on the switch

show spanning-tree vlan

This command displays the association between a VLAN and a multiple spanning tree
instance. The
Format
Modes
VLAN Identifier The VLANs associated with the selected MST instance.
Associated Instance Identifier for the associated multiple spanning tree instance or "CST" if

VLAN Commands

This section describes the commands you use to configure VLAN settings.
52 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
show spanning-tree mst summary
Privileged EXEC
User EXEC
show spanning-tree summary
Privileged EXEC
User EXEC
IEEE 802.1d) based upon the Force Protocol Version parameter.
used.
corresponds to an existing VLAN ID.
<vlanid>
show spanning-tree vlan <vlanid>
Privileged EXEC
User EXEC
associated with the common and internal spanning tree.