No Arp Dynamicrenew; Arp Purge; Arp Resptime; Arp Retries - D-Link DWL-8500AP Command Reference Manual

no arp dynamicrenew

This command prevents dynamic ARP entries from renewing when they age out.
Format
Mode

arp purge

This command causes the specified IP address to be removed from the ARP cache. Only
entries of type dynamic or gateway are affected by this command.
Format
Mode

arp resptime

This command configures the ARP request response timeout.
The value for
<seconds>
response timeout time in seconds. The range for
Default
Format
Mode
no arp resptime
This command configures the default ARP request response timeout.
Format
Mode

arp retries

This command configures the ARP count of maximum request for retries.
The value for
<retries>
retries. The range for
Default
Format
Mode
no arp retries
This command configures the default ARP count of maximum request for retries.
Format
Mode
no arp dynamicrenew
Privileged EXEC
arp purge <ipaddr>
Privileged EXEC
is a valid positive integer, which represents the IP ARP entry
1
arp resptime <1-10>
Global Config
no arp resptime
Global Config
is an integer, which represents the maximum number of request for
is an integer between 0-10 retries.
<retries>
4
arp retries <0-10>
Global Config
no arp retries
Global Config
is between 1-10 seconds.
<seconds>
Address Resolution Protocol (ARP) Commands
3 Routing Commands
119