CLI Command Reference
Captive Portal Interface Commands
Use the commands in this section to view information about the interfaces on the switch that
are associated with captive portals or that are capable of supporting a captive portal.
show captive-portal interface configuration status
This command displays the interface to configuration assignments for all captive portal
configurations or a specific configuration.
Format
Mode
Intf Valid slot and port number separated by forward slashes.
Intf Description Describes the interface.
CP ID
CP Name
Type
show captive-portal interface capability
This command displays all the captive portal eligible interfaces or the interface capabilities for
a specific captive portal interface.
Format
Mode
Intf Valid slot and port number separated by forward slashes.
Intf Description Describes the interface.
Type
218
© 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
show captive-portal interface configuration [cp-id] status
Privileged EXEC
Shows the captive portal ID the connected client is using.
Shows the name of the captive portal the connected client is using.
Shows the type of interface.
show captive-portal interface capability [slot/port]
Privileged EXEC
Shows the type of interface.