No Dot1X Timeout; Dot1X User; Users Defaultlogin; Users Login - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference

no dot1x timeout

This command sets the value, in seconds, of the timer used by the authenticator state machine
on this port to the default values. Depending on the token used, the corresponding default
values are set.
Format
Mode

dot1x user

This command adds the specified user to the list of users with access to the specified port or all
ports. The
Format
Mode
no dot1x user
This command removes the user from the list of users with access to the specified port or all ports.
Format
Mode

users defaultlogin

This command assigns the authentication login list to use for non-configured users when
attempting to log in to the system. This setting is overridden by the authentication login list
assigned to a specific user if the user is configured locally. If this value is not configured, users
will be authenticated using local authentication only.
Format
Mode

users login

This command assigns the specified authentication login list to the specified user for system
login. The
login list.
If the user is assigned a login list that requires remote authentication, all access to the interface
from all CLI, web, and telnet sessions will be blocked until the authentication is complete.
Note that the login list associated with the 'admin' user can not be changed to prevent
accidental lockout from the switch.
Format
Mode
78 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no dot1x timeout {reauth-period | quiet-period | tx-period |
supp-timeout | server-timeout}
Interface Config
parameter must be a configured user.
<user>
dot1x user <user> {<slot/port> | all}
Global Config
no dot1x user <user> {<slot/port> | all}
Global Config
users defaultlogin <listname>
Global Config
must be a configured
<user>
users login <user> <listname>
Global Config
and the
<user> <listname>
must be a configured