Port-Channel; Addport; Deleteport (Interface Config); Deleteport (Global Config) - D-Link DWL-8500AP Command Reference Manual

port-channel

This command configures a new port-channel (LAG) and generates a logical slot/port number
for the port-channel. The
as well as alphanumeric characters. Use the
port number for the logical interface.
Before you include a port in a port-channel, set the port physical mode. For
NOTE:
more information, see
Format
Mode
no port-channel
This command deletes a port-channel (LAG).
Format
Mode

addport

This command adds one port to the port-channel (LAG). The first interface is a logical slot/
port number of a configured port-channel.
Before adding a port to a port-channel, set the physical mode of the port. For
NOTE:
more information, see
Format
Mode

deleteport (Interface Config)

This command deletes the port from the port-channel (LAG). The interface is a logical slot/
port number of a configured port-channel.
Format
Mode

deleteport (Global Config)

This command deletes all configured ports from the port-channel (LAG). The interface is a
logical slot/port number of a configured port-channel. To clear the port channels, see
port-channel" on page 273
Format
Mode
field is a character string which allows the dash "-" character
<name>
"speed" on page 40.
port-channel <name>
Global Config
no port-channel {<logical slot/port> | all}
Global Config
"speed" on page 40.
addport <logical slot/port>
Interface Config
deleteport <logical slot/port>
Interface Config
deleteport {<logical slot/port> | all}
Global Config
command to display the slot/
show port channel
Port-Channel/LAG (802.3ad) Commands
2 Switching Commands
"clear
89