Session-Limit; Session-Timeout; Telnetcon Maxsessions - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
no transport output telnet
Use this command to prevent new outbound Telnet connection from being established.
Format
Mode

session-limit

This command specifies the maximum number of simultaneous outbound Telnet sessions. A
value of 0 indicates that no outbound Telnet session can be established.
Default
Format
Mode
no session-limit
This command sets the maximum number of simultaneous outbound Telnet sessions to the
default value.
Format
Mode

session-timeout

This command sets the Telnet session timeout value.The timeout value unit of time is minutes.
Default
Format
Mode
no session-timeout
This command sets the Telnet session timeout value to the default. The timeout value unit of
time is minutes.
Format
Mode

telnetcon maxsessions

This command specifies the maximum number of Telnet connection sessions that can be
established. A value of 0 indicates that no Telnet connection can be established. The range is
0-5.
Default
Format
Mode
300 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
no transport output telnet
Line Config
5
session-limit <0-5>
Line Config
no session-limit
Line Config
5
session-timeout <1-160>
Line Config
no session-timeout
Line Config
5
telnetcon maxsessions <0-5>
Privileged EXEC