Show Sntp Client; Show Sntp Server - D-Link DWL-8500AP Command Reference Manual

CLI Command Reference
Broadcast Count Current number of unsolicited broadcast messages that have been received
Multicast Count Current number of unsolicited multicast messages that have been received

show sntp client

This command is used to display SNTP client settings.
Format
Mode
Client Supported Modes
SNTP Version The highest SNTP version the client supports
Port
Client Mode

show sntp server

This command is used to display SNTP server settings and configured servers.
Format
Mode
Server IP Address IP address of configured SNTP Server
Server Type
Server Stratum Claimed stratum of the server for the last received valid packet.
Server Reference ID Reference clock identifier of the server for the last received valid
Server Mode SNTP Server mode.
Server Maximum Entries Total number of SNTP Servers allowed.
Server Current Entries Total number of SNTP configured.
For each configured server:
IP Address
Address Type Address Type of configured SNTP server.
Priority
Version
Port
Last Attempt Time Last server attempt time for the specified server.
Last Update Status Last server attempt status for the server.
Total Unicast Requests Number of requests to the server.
Failed Unicast Requests Number of failed requests from server.
280 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
and processed by the SNTP client since last reboot.
and processed by the SNTP client since last reboot
show sntp client
Privileged EXEC
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Client Port
Configured SNTP Client Mode
show sntp server
Privileged EXEC
Address Type of Server.
packet.
IP address of configured SNTP Server.
IP priority type of the configured server.
SNTP Version number of the server. The protocol version used to query the
server in unicast mode.
Server Port Number