Show Copper-Ports Cable-Length - D-Link xStack DWS-3200 Series Cli Manual

DXS/DWS-3200 series CLI Reference Guide

show copper-ports cable-length

The show copper-ports cable-length Privileged EXEC mode command displays the estimated copper cable
length attached to a port.
Syntax
show copper-ports cable-length [interface]
Parameters
•
interface — A valid Ethernet port. (Full syntax: unit/port)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The port must be active and working in 1000M mode.
Example
The following example displays the estimated copper cable length attached to all ports.
Console# show copper-ports cable-length
Port Length [meters]
---- ---------------------
1/1 < 50
1/2 Copper not active
1/3 110-140
1/1 Fiber
Page 195