Save Counter States; Figure 35 Save Counter States - Leibinger JET2NEO Manual

Page 86

7.2.1.7 Save counter states

For leaving a job, the counter status of integrated job counters are normally not saved,
that means for calling this job again, the counter states are 0 respectively set to the
predefined start values.
If the print should be continued with already existing counter states for calling the job again,
you have to activate the function <Save counters>.
The function is activated or deactivated by clicking on the control box. If this function is
activated it is displayed by a  in the control box.
Figure 35
Save counter states
1
1 – Control box <Save counters>
Release R1.12 en
Data entry/Programming
Function deactivated
Function activated
Group 7
JET2 neo