Draytek Vigor2760 User Manual page 86

Available parameters are listed below:
Item
Enable
Name
Description
Bridge Profile Type
ADSL_Mode
Description
Check the box to enable such profile.
Type a name for such profile.
If required, type brief description for such profile.
Please select which type of DSL network this bridge will
connect to. The bridge interface will operate only when the
configuration here matches the current DSL mode of the
Vigor router.
Both – Choose it configure the settings for ADSL and
VDSL2 at the same time.
ADSL – Choose it to configure the settings specified for
ADSL.
VDSL2 – Choose it to configure the settings specified for
VDSL2.
Note that the type you choose will result in different web
settings offered by this web page.
This setting is available when ADSL is chosen as Bridge
Profile Type.
PVC Binding – Use the drop down list to specify one profile
binding to such profile.
VPI - Stands for Virtual Path Identifier. It is an 8-bit
header inside each ATM cell that indicates where the cell
should be routed. The ATM, is a method of sending data in
small packets of fixed sizes. It is used for transferring data to
client computers.
VCI - Stands for Virtual Channel Identifier. It is a 16-bit
76
Vigor2760 Series User's Guide