Draytek Vigor2760 User Manual page 76

Available parameters are listed below:
Item
Enable
Name
Description
Profile Type
ADSL Mode
Description
Check the box to enable such profile.
Type a name for such profile.
If required, type brief description for such profile.
Both – Choose it to configure the settings including ADSL
and VDSL2.
ADSL – Choose it to configure the settings specified for
ADSL.
VDSL2 – Choose it to configure the settings specified for
VDSL2.
Note that the type you choose will result in different web
settings offered by this web page.
This setting is available when Both/ADSL is chosen as
Profile Type.
VPI - Stands for Virtual Path Identifier. It is an 8-bit
header inside each ATM cell that indicates where the cell
should be routed. The ATM, is a method of sending data in
small packets of fixed sizes. It is used for transferring data to
client computers.
VCI - Stands for Virtual Channel Identifier. It is a 16-bit
field inside ATM cell's header that indicates the cell's next
destination as it travels through the network. A virtual
66
Vigor2760 Series User's Guide