Draytek Vigor2760 User Manual page 95

Vigor2760 Series User's Guide
IP Address: Enter a value of the IP address for the
DHCP server to start with when issuing IP addresses.
End IP Address: Enter a value of the IP address for
the DHCP server to end with when issuing IP
addresses.
Gateway - Type the IP address of the DHCP server.
Lease Time (min) - It allows you to set the leased time
for the specified PC.
DNS Server - Choose Local or Custom as the DNS
server for such DHCP server profile. Local: The
system will use the IP address specify in
Network>>DNS as the DNS server for the clients
within the IP range. If not, simply choose Custom and
define IP address as the DNS server. Custom: You can
specify another DNS server IP address (es) here if your
ISP often provides you more than one DNS Server. If
your ISP does not provide it, the router will
automatically apply default primary DNS Server IP
address.
IP DHCP Binding - This function is used to bind the
IP and MAC address in LAN to have a strengthening
control in network. When this function is enabled, all
the assigned IP and MAC address binding together
cannot be changed. If you modified the binding IP or
MAC address, it might cause you not access into the
Internet.
When the client with the MAC address specified in this
page has the request of IP address from the DHCP
server, the bound IP of the MAC address will be
assigned to that client. MAC Address: Type the MAC
address that is used to bind with the assigned IP
address. IP Address: Type the IP address that will be
used for the specified MAC address.
You also can use Select to choose the device you want.
Advanced Settings

DHCP Option - DHCP packets can be processed by
adding option number and data information when such
function is enabled.

Code - Type a number for such function.
85