Advanced - Draytek Vigor2760 User Manual

4 . 5 . 3 . 2
4 . 5 . 3 . 2
Such page allows you to configure the processing rate for WCF mechanism.
Each item will be explained as follows:
Item
Cache
Apply
Reset
After finished the settings above, click Apply to save the file.
Vigor2760 Series User's Guide
A d v a n c e d
A d v a n c e d
Description
None – the router will check the URL that the user wants to
access via WCF precisely, however, the processing rate is
normal. Such item can provide the most accurate URL
matching.
L1 Cache – the router will check the URL that the user
wants to access via WCF. If the URL has been accessed
previously, it will be stored for a short time (about 1 second)
in the router to be accessed quickly if required. Such item
can provide accurate URL matching with faster rate.
L2 Cache – the router will check the URL that the user
wants to access via WCF. If the data has been accessed
previously, the IP addresses of source and destination IDs
will be memorized for a short time (about 1 second) in the
router. When the user tries to access the same destination ID,
the router will check it by comparing the record stored. If it
matches, the page will be retrieved quickly. Such item can
provide URL matching with the fastest rate.
L1+L2 Cache – the router will check the URL with fast
processing rate combining the feature of L1 and L2.
Click it to save the settings.
Click it to retrieve the default settings of this page.
179