Draytek Vigor2760 User Manual page 100

Delete
Move
Reset
Refresh
Enable
Name
External Interface
Mapped IP Address
Mapped IP Address End
Type
To add a NAT profile, please do the following:
1. Under Virtual Host, click Add.
2. The following page appears.
Available parameters are listed below:
without editing the NAT profile(s).
It is convenient for processing multiple NAT profiles at one
time.
Remove the selected NAT profile.
Move the selected profile to a new place.
Click it to rest to factory default settings.
Click it to refresh the web page.
Display the activation status for such interface.
Enable – The NAT profile is activated.
Disable –The NAT profile is not activated.
Display the profile name for NAT.
Display the WAN interface (for external connection) applied
by such virtual host profile.
Display the LAN IP address that the Destination IP will be
transferred to.
This value will be assigned by the system automatically
when Port Redirection is selected as the Type.
Display the NAT type used in such profile.
90
Vigor2760 Series User's Guide