Draytek Vigor2760 User Manual page 111

Dest Port Start /
Dest Port End
To add a policy route profile, please do the following:
1. Click Add.
2. The following page appears.
Available parameters are listed below:
Item
Enable
Name
Criteria
Vigor2760 Series User's Guide
Displays the port number setting for the start/end of the
destination port.
Description
Check the box to enable such profile.
Type a name for such profile.
Protocol - Use the drop-down menu to choose a proper
protocol for the WAN interface.
Source IP Address – Specify an IP address or a range of IP
addresses as the source IPs for WAN interface.

Any – Any IP can be treated as the source IP.

Single – Type one IP address.

Range – Type the start and end IP addresses on
101