Ipv6 Static Route - Draytek Vigor2760 User Manual

Interface
Gateway
Apply
Clear
Cancel
3. After finished the settings above, click Apply to save the settings.
4 . 1 . 4 . 3
4 . 1 . 4 . 3
When you have several subnets in your LAN, sometimes a more effective and quicker way for
connection is the Static route function rather than other method. You may simply set rules to
forward data from one specified subnet to another specified subnet without the presence of
RIP.
This page allows you to create several static routes (based on IPv6) to be selected for the route.
Click Network>>Static Route>>IPv6 Static Route to get the following page:
Each item will be explained as follows:
Item
Add
Edit
Vigor2760 Series User's Guide
I P v 6 S t a t i c R o u t e
I P v 6 S t a t i c R o u t e
this page.
Choose an interface for the static route.
Type an IP address of the other router. All packets destined
to destination IP address/mask will be forwarded to the
gateway specified here.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
Description
Create new NAT profiles.
Edit the selected NAT profile.
To edit the profile, simply check the profile box you want to
edit and then click this button.
97