Remote Dial-In User - Draytek Vigor2760 User Manual

4 . 1 1 . 3 R e m o t e D
4 . 1 1 . 3 R e m o t e D
You can manage remote access by defining a remote dial-in user profile, so that users can be
authenticated to dial-in via VPN connection. You can set parameters including specified
connection peer ID, connection type (VPN connection - including PPTP, IPSec Tunnel, and
L2TP by itself or over IPSec) and corresponding security methods, etc.
Open VPN and Remote Access>>Remote Dial-in User to get the following web page:
Available parameters are listed as follows:
Item
Enable
Name
Authentication Type
i a l - i n U s e r
i a l - i n U s e r
Description
Check the box to enable such profile.
Type the name of the profile.
Specify the type (Local or External) for authentication.
User Account – It is available when Local is selected as
authentication type. Only the object profiles configured with
Local type will be displayed here.
Click + to enable DHCP or specify an IP address for the user
account.
262
Vigor2760 Series User's Guide