Draytek Vigor2760 User Manual page 152

Source Interface
Source Address
Schedule
Service
Quality of Service
Action
Log
Apply
Clear
Cancel
Set the interface for the packets. Use the drop down list to
choose the source interface
Set the IP address (es) which will be filtered by such rule.
Use the drop down list to choose the source address and the
destination address.
Set PCs on LAN to work at certain time interval only. You
may choose up to 4 schedules out of the 15 schedules
pre-defined in Applications >> Schedule setup. The default
setting of this field is Any and the function will always work.
Check the box(es) from the drop down list to choose suitable
service type.
Choose one of the QoS class to be applied as firewall rule.
Highest indicates highest bandwidth ratio.
For detailed information of setting QoS, please refer to the
related section later.
Choose the action to be taken when packets match the rule.
Block Immediately - Packets matching the rule settings in
(A) Filter Part will be dropped immediately.
Pass Immediately - Packets matching the rule settings in (A)
Filter Part will be passed immediately.
The filtered information for any packet matches with such
rule will be recorded in Syslog if such box is checked.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
142
Vigor2760 Series User's Guide