Draytek Vigor2760 User Manual page 84

Prefix Send To
Default Route
Always On
After finished the settings above, click Apply to save the settings
UserName – Type the name obtained from the broker.
Please apply new account at http://www.sixxs.net/. It is
suggested for you to apply another username and password.
The maximum length of the name you can set is 19
characters.
Password –Type the password assigned with the user name.
The maximum length of the password you can set is 19
characters.
Confirm Password – Type the password again to make the
confirmation.
Tunnel ID –
Subnet Prefix –Type the subnet prefix address getting from
service provider. The maximum length of the prefix you can
set is 128 characters.
6RD - Allows you to setup 6rd for WAN interface.
6rd Mode – Specify the mode for configuring detailed
settings.

Auto – Retrieve 6rd prefix automatically from 6rd
service provider. The IPv4 WAN must be set as
"DHCP".

Static - Set 6rd options manually.
Border Relay IPv4 IP – Type the IPv4 addresses of the 6rd
Border Relay for a given 6rd domain.
IPv4 Mask Length – Type a number of high-order bits that
are identical across all CE IPv4 addresses within a given 6rd
domain.
It may be any value between 0 and 32.
Prefix –Type the 6rd IPv6 address.
Prefix Length - Type the IPv6 prefix length for the 6rd IPv6
prefix in number of bits.
Choose the interface (LAN).
Check the box to enable the default route for such WAN
profile.
If you want to connect to Internet all the time, check the
Always On box.
74
Vigor2760 Series User's Guide