Draytek Vigor2760 User Manual page 165

2. The following setting page will appear.
Available parameters are listed below:
Item
Name
Protocol
Start/End Source
Port
Start/End
Destination Port
Application
Vigor2760 Series User's Guide
Description
Type a name for this profile. Maximum 15 characters are
allowed.
Specify the protocol(s) which this profile will apply to.
Source Port and the Destination Port column are available
for TCP/UDP protocol. It can be ignored for other protocols.
Type the port values for both start source port and end
source port respectively.
Type the port values for both start destination port and end
destination port respectively.
Specify the type of the service object. It will influence the
effect of the firewall setting. For example, the URL Content
Filter and Web Content Filter will run only when HTTP is
selected in such field. If you choose None, then UCF and
WCF will not run normally.
155