TX/RX Packet Count
Status
To edit a time quota or data quota of data flow monitor, please do the following:
1.
Choose and check the profile you want.
2.
Click Edit to open the following page.
Available parameters are listed below:
Item
IP Address
User
Profile
Time Quota
Data Quota
Vigor2760 Series User's Guide
Display the transmitting/receiving packets counted by such
user.
Display the status (block or pass) of the PC.
Description
Display the IP address of the host. Such IP address is fixed
and cannot be changed.
Display the name of the user. Such name cannot be
changed.
Display the name of the profile. Such name cannot be
changed.
Change the value if you want.
If you did not configure such settings for such user under
User Management>>Privilege, it is impossible for you to
modify the value here.
Change the value if you want.
If you did not configure such settings for such user under
301