Default Rule - Draytek Vigor2760 User Manual

All the incoming packets must be filtered with settings in (A) User Part for identity
authentication first then (B) Application Part. If the packets doest not pass the identity
authentication, they will not be filtered with current filter rule (B) but filtered by next filter
rule directly.
4 . 3 . 2 . 2 D e f a u l t R u
4 . 3 . 2 . 2 D e f a u l t R u
When there is no filter rule existed or the incoming packets cannot match with any filter
conditions, they will be filtered by the default rule configured in this page.
(A)
User
Part
l e
l e
138
(B)
Application
Part
Vigor2760 Series User's Guide