Draytek Vigor2760 User Manual page 108

Delete
Reset
Refresh
Enable
Name
Destination IPv6
Address/Mask
Interface
Gateway
Remove the selected NAT profile.
Click it to rest to factory default settings.
Click it to refresh the web page.
Display the activation status for such interface.
Enable – The profile is activated.
Disable –The profile is not activated.
Display the profile name for the static route.
Display the destination address/mask of the static route.
Display the interface that such static route uses.
Display the IP address receiving the packets from destination
IP address/mask.
98
Vigor2760 Series User's Guide