Draytek Vigor2760 Delight Quick Start Manual

www.draytek.net.nz www.snappernet.co.nz
Vigor2760 Delight » Quick Start Guide
Configure your computer's network
Connect your computer to the Vigor2760 with an Ethernet cable (supplied). Ensure your computer is obtaining an IP
address automatically.
Connect to the Web Interface
Open your Web Browser (e.g. Internet Explorer, Google Chrome or Mozilla Firefox), enter http://192.168.1.1/ into
the address bar, and press the Enter key on your keyboard.
You should be asked for a username and password. Enter admin into both fields (the password may show as dots or
stars) and click the Login button.
Run the Quick Start Wizard
On the left-hand navigation menu, click Wizards and then Quick Start Wizard.
Choose a new login password - you will use this to log into the Web Interface in
future. Enter the current password (admin) into the Old Password field. Enter your
new password into the New and Confirm Password fields and click Next >
Note: The passwords may show as dots or stars
VDSL
In the WAN Interface section you can leave all settings as default unless you are connecting to on a Chorus
VLAN Tag insertion Tag value 10
line in which case you must enable and set the to , then click Next >