Draytek Vigor2760 User Manual page 120

To edit the switch port setting, please do the following:
1. Choose the port you want and double click on it.
2. Click Edit to open the following page.
Available parameters are listed below:
Item
Name
Enable
Port Type
Interface Belong
Link Speed
PVID
Tag Out
Apply
Clear
Cancel
Enable – Packets sending out through such port will be
tagged.
Description
Display the name of the physical port.
Check the box to enable such feature.
At present, there is only one type for you to choose.
Displays the name of the profile in which such physical port
is currently used.
Choose the line speed for downloading and uploading file.
Usually, keep the default setting will be better.
In default, Auto will be selected.
Type the port VLAN ID number for the untagged packets.
The default value is 4011.
If it is checked, all the packets will be transferred without
any tag number.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
110
Vigor2760 Series User's Guide