Draytek Vigor2760 User Manual page 145

To add a filter rule profile, please do the following:
1. Click Add.
2. The following page appears.
Available parameters are listed below:
Item
(A) Filter Part
Enable
Name
Description
Source Interface /
Destination Interface
Vigor2760 Series User's Guide
Disable –NAT is not activated.
Description
Check the box to enable the profile.
Type the name of the rule profile. Maximum length is 15-
character long.
Enter filter set comments/description.
Set the direction of packet flow. Use the drop down list to
choose the source interface and the destination interface.
135
(A)
Filter Part
(B)
Application
Part