To add a static route profile, please do the following:
1.
Click Add.
2.
The following page appears.
Available parameters are listed below:
Item
Enable
Name
Destination IPv6
Address
Interface
Gateway
Apply
Vigor2760 Series User's Guide
Description
Check the box to enable such profile.
Type a name for such profile.
Type the IPv6 address of the destination. All the packets into
such IPv6 address will be forwarded to the gateway specified
in this page.
Choose an interface for the IPv6 static route.
Type an IPv6 address of the other router. All packets
destined to destination IPv6 address/mask will be forwarded
to the gateway specified here.
Click it to save the settings.
99