Draytek Vigor2760 User Manual page 127

SSID
Hide SSID
Security Setting
Default Key
Key
Confirm Key
Vigor2760 Series User's Guide
It means the identification of the wireless LAN. SSID can be
any text numbers or various special characters. The default
SSID will be displayed automatically. We suggest you to
change it.
Uncheck the box to make the SSID being seen by wireless
clients.
Check the box to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your wireless
LAN.
Choose the wireless mode for this router.
WEP - Accepts only WEP clients and the encryption key
should be entered in WEP Key.
WPA-PSK (TKIP)/WPA2-PSK(AES) - Accepts only WPA
clients and the encryption key should be entered in PSK. The
WPA encrypts each frame transmitted from the radio using
the key, which either PSK (Pre-Shared Key) entered
manually in this field below or automatically negotiated via
802.1x authentication.
Mixed (WPA/WPA2)-PSK - Accepts WPA and WPA2
clients simultaneously and the encryption key should be
entered in PSK.
Such function is available when WEP is selected as Security
Setting.
Choose one of the key selections as the default key. All
wireless devices must support the same WEP encryption bit
size and have the same key.
Such function is available when WEP is selected as Security
Setting.
The format of WEP Key is restricted to 5 ASCII characters
or 10 hexadecimal values in 64-bit encryption level, or
restricted to 13 ASCII characters or 26 hexadecimal values
in 128-bit encryption level. The allowed content is the ASCII
characters from 33(!) to 126(~) except '#' and ',' .
Such function is available when WEP is selected as Security
Setting.
Type the encryption key again for confirmation.
117