2.
The following setting page will appear.
Available parameters are listed below:
Item
Name
Server IP Address
Port
Server Password
Confirm Server
Password
Apply
Clear
Cancel
3.
After finished the settings above, click Apply to save the file. Now, a new TACACS+
profile has been created.
Vigor2760 Series User's Guide
Description
Type a name for the TACACS+ server.
Type the IP address of TACACS+ server.
The UDP port number that the TACACS+ server is using.
The default value is 49.
The TACACS+ server and client share a password that is
used to authenticate the messages sent between them. Both
sides must be configured to use the same password.
Re-type the password for confirmation.
Click it to save the settings.
Click it to remove the modification of the web page.
Click it to return to previous web page.
189