Draytek Vigor2760 User Manual page 233

Default RX Limit
Type
Address Object
Start IP Address
End IP Address
Maximum TX Limit
Maximum RX Limit
Click Apply to save the settings.
Vigor2760 Series User's Guide
computer in LAN.
Define the default capacity of the downstream for each
computer in LAN.
Display the type selected for such bandwidth limit profile
Display the address object selected for such bandwidth limit
profile.
Display the start IP address for such bandwidth limit
profile.
Display the end IP address for such bandwidth limit
profile..
Display the maximum upstream limit for such bandwidth
limit profile.
Display the maximum downstream limit for such bandwidth
limit profile.
This button allows you to add new rule for bandwidth limit.
A pop up dialog will appear if it is pressed.
Type – Choose Range (you have to specify start IP and
end IP) or Object (you have to choose an IP object) as the
Type to determine next information to be specified.
Start IP Address –It is available when Range selected as
the Type. Specify the starting point (IP address) which is
suitable for such session limit.
End IP Address –It is available when Range selected as
the Type. Specify the ending point (IP address) which is
suitable for such bandwidth limit.
Address Object – It is available when Object is selected
as the Type.
Maximum TX Limit –Define the maximum capacity of
the upstream for each computer in LAN.
Maximum RX Limit - Define the maximum capacity of
the downstream for each computer in LAN.
223