Draytek Vigor2760 User Manual page 106

Delete
Reset
Refresh
Enable
Name
Destination IP
Address/Mask
Interface
Gateway
To add a static route profile, please do the following:
1. Click Add.
2. The following page appears.
Available parameters are listed below:
Item
Enable
Name
Destination IP
Address/Mask
Remove the selected NAT profile.
Click it to rest to factory default settings.
Click it to refresh the web page.
Display the activation status for such interface.
Enable – The profile is activated.
Disable –The profile is not activated.
Display the profile name for the static route.
Display the destination address/mask of the static route.
Display the interface that such static route uses.
Display the IP address receiving the packets from destination
IP address/mask.
Description
Check the box to enable such profile.
Type a name for such profile.
Type the IP address of the destination. All the packets into
such IP address will be forwarded to the gateway specified in
96
Vigor2760 Series User's Guide