Draytek Vigor2760 User Manual page 290

Confirm ACS Server
Password
Register Interface
Port
CPE URL
CPE Username
CPE Password
Confirm CPE Password
Advanced
STUN Settings
Apply
Reset
Refresh
Username: XXX
Password: password
Type the password for ACS Server for authentication again
for confirmation.
Display the interface used for connecting to VigorACS
server.
Sometimes, port conflict might be occurred. To solve such
problem, you might change port number for CPE.
Such information is useful for Auto Configuration Server. In
default, the system will detect related information of the CPE
automatically and displayed in this field.
Display the URL of the CPE.
Display the username of the CPE.
Display the password of the CPE.
Display the password of the CPE for confirmation.
Periodic Update – Check the box (Enable) to make the
system send inform message to ACS server periodically (with
the time set in the box of interval time).
Periodic Time (second) –The default setting is Enable.
Please set interval time or schedule time for the router to send
notification to CPE.
The default is disabled. If you check the box of STUN
Enable, please type the relational settings listed below:
Server Address – Type the IP address of the STUN server.
Server Port – Type the port number of the STUN server.
Click it to save the settings.
Click it to retrieve the default settings of this page.
Click it to clear current settings and return to the settings
saved previously.
280
Vigor2760 Series User's Guide