Draytek Vigor2760 User Manual page 39

Available parameters are listed as follows:
Item
Protocol Setting
IPv4 Setting and/or
IPv6 Settings
Vigor2760 Series User's Guide
Description
VLAN Encapsulation – It is used to enable the function of
VLAN with tag. The router will add specific VLAN number
to all packets while sending them out. Please type the tag
value and specify the priority for the packets sending by the
router.
VLAN ID –Type the value as the VLAN ID number. The
range is form 1 to 4000.
Priority(802.1p) - Type the packet priority number for such
VLAN. The range is from 0 to 7.
The format of the IP address (IPv4 or IPv6) you can type
depends on the IP Version selected on STEP1.
IP Address - Type the IP address.
Subnet Mask - Type the subnet mask.
Gateway - Type the gateway IP address.
29