SUN2000-(8K, 10K)-LC0 Series
User Manual
4.1 Installation Modes
The inverter can be wall-mounted or support-mounted.
Table 4-1 Installation modes
Installation
Mode
Wall
mounting
Support
mounting
4.2 Installation Requirements
4.2.1 Site Selection Requirements
Basic Requirements
●
●
●
●
●
●
Issue 01 (2023-09-15)
Screw Specifications
M6x60 stainless steel expansion bolt
M6 bolt assembly
The inverter is protected to IP66 and can be installed indoors or outdoors.
Do not install the inverter in a place where personnel are easy to come into
contact with its enclosure and heat sink, because these parts are hot during
operation.
Do not install the inverter in noise-sensitive areas.
Do not install the inverter near flammable or explosive materials.
Keep the inverter out of reach of children.
The inverter will be corroded in salt areas, and the salt corrosion may cause
fire. Do not install the inverter outdoors in salt areas. A salt-affected area
Copyright © Huawei Digital Power Technologies Co., Ltd.
4
Installation
Description
Delivered with
the product
Prepared by the
customer
4 Installation
24