Table of Contents
Advertisement
– First insert right side of mounting frame -1- into cover of centre
console -2- and then push mounting frame in on left side to
ensure it locks into place securely.
2.14
Removing and installing pushbutton for
emergency braking function
The pushbutton for emergency braking function - E773- is an in‐
tegral part of centre console switch module 1 - EX23- in the centre
console in front of the gear lever.
Removing and installing centre console switch module - EX23-
⇒ page 138
.
2.15
Removing and installing sliding sunroof
adjustment regulator
Removing
– Switch off ignition and all electrical consumers, and pull out
ignition key.
– Remove front interior and reading light
– Release catches -arrows- and remove sliding sunroof adjust‐
ment regulator - EX4- -3- from interior and reading light.
Installing
Installation is carried out in reverse order of removal.
⇒ page 123
.
Electrical system - Edition 03.2017
up! 2012 ➤
139
2. Controls
Advertisement
Table of Contents
