– Pull out mobile phone operating electronics control unit in
-direction of arrow- from bracket.
Installing
Installation is carried out in the reverse sequence of removal.
5.5
Changing mobile phone cradle from old
to new dash panel
If dash panel is renewed, no provision is made for mobile phone
cradle.
Aperture for mobile phone cradle must be cut out by hand.
– Place dash panel on soft surface.
Work measures are performed on reverse of dash panel.
Recess can be found on right next to radio slot -arrow-.
– Drill both holes -arrows- using 6.5 mm drill bit.
Passat 2011 ➤ , Passat Variant 2011 ➤
Communication - Edition 07.2019
101
5. Telephone system